Issue link: https://resources.randsim.com/i/1504493
85 ©2023 ANSYS, Inc. Validation of Cycle Jump Support + Multi-CLOAD Cycle Cycle time No of cycles Time points 1 3 20 4 2 100 10 6 3 12 15 5 Multi-CLOAD with varying cycle time • Multiple cyclic loading with different cycle time and time points. • Validated against the Do-Loop Solve • Test with TBC model Cycle-Jump with Creep Support • Tested for various implicit creep equations. • Single element tests • Uniaxial test setup with a hole • Perforated model • Tested different creep material model combinations. • Validated against the non-CJump test. EPCREQV SEQV U X 1-Element Test Uniaxial Test Perforated Model EPCREQV CREEP + CHAB TBC model • Two materials with different material models. • Two type of cyclic loading: thermal and pressure. Cycle-Jump support for Generalized Damage • Tested for different material model combinations. • With various problem setup • Plate with hole • Notched specimen • Dumbbell • Validated against the non-CJump test. GDMG Plate with hole Notched GDMG GDMG + CHAB GDMG + BKIN SY GDMG Sy Dumbbell