Issue link: https://resources.randsim.com/i/1504493
266 ©2023 ANSYS, Inc. Edge Crack (Beta) - Inputs to define the cutting plane • Edge crack can be defined on any surface of the solid and it cuts at least three surfaces • Coordinate System - Specifies the location & orientation of the Crack - Y axis is the normal to the crack surface and Z axis is the cut through direction • Start Width (a) - width at the start • End Width (b) - width at the end • Mid width (c) - default (Avg. of a and b) • Depth (d) - depth/gap between a and b lines