Issue link: https://resources.randsim.com/i/1515867
• Full Support ▲ Limited Capability ▪ Requires more than 1 product 24 / FLUIDS CFD Pro CFD Premium CFD Enterprise BladeModeler Vista TF TURBOGRID CAPABILITIES Support for multiple input formats (CAD, NDF, profiles/curves) • • Automatic creation of high-fidelity CAD from profile/curve input ▲ ▲ Mesh refinement maintaining consistent mesh topology • • BLADEGEN AND BLADEEDITOR CAPABILITIES Turbomachinery blade design • Turbo-specific CAD geometry creation • Single CAD definition for CFD and FEA • Flow Path CAD geometry creation • Blade CAD geometry creation • Splitter Blade CAD geometry creation • Create high fidelity variable radius blade blends • Flank milled blades • VISTA CAPABILITIES Meanline / 1D Turbomachinery Design • Centrifugal Compressor Design (CCD) • Centrifugal Pump Design (CPD) • Radial Turbine Design (RTD) • Axial Fan Design (AFD) • Through-Flow Quasi-2D Analysis for Turbomachinery Design • Centrifugal Compressor Map creation (CCM) • CFD POST CABABILITIES Simulation Reports • • Turbo-specific Surface and Line locators • • Turbo coordinate systems • • Turbo macros and calculations • • Multiple case file comparison • • 1 = Ansys nCode DesignLife Products 2 = Ansys Fluent 3 = Ansys DesignXplorer 4 = Ansys SpaceClaim 5 = Ansys Customization Suite (ACS) 6 = Ansys HPC, ANSYS HPC Pack or Ansys HPC Workgroup 7 = Ansys Granta Materials Data for Simulation 8 = Ansys Additive Suite 9 = Ansys Composite Cure Simulation 10 = Ansys SPEOS for NX & ANSYS SPEOS for Creo Parametric 11 = Ansys SPEOS 12 = Ansys SPEOS & Ansys SPEOS for NX 13 = Ansys CFD Pro - Ansys Fluent with a reduced set of capabilities DMP = Distributed-memory parallel SMP = Shared-memory parallel MAPDL = Mechanical APDL Explicit = Autodyn RBD = Rigid Body Dynamics Aqwa = Aqwa